Note: The above diagram is for illustration only and is not to scale.
For a dimensioned drawing, see 2102_frame_assembly_110108.pdf
(89 KB pdf file)
NextWindow 2102 Touch Frames are made to fit particular manufacturers' display
screens. The touch frame consists of a low-profile aluminium frame permanently
bonded to glass.
Some constraints apply in the available dimensions, depending
on the aspect ratio. Please quote the overall dimensions (X, Y), and the touch
sensitive area dimensions (A, B) required.
 |
Maximum standard display size 67". For non-standard larger screens, contact NextWindow. |
|
Minimum overall width (X) is 545 mm. |
|
Touchable area horizontal dimension A = X - 40 mm
Touchable area vertical dimension B = Y - 60 mm |
|
The application design should have an allowance (d) at the top of the
screen, where touch sensitivity is undefined. The undefined touch zone
and hence the height of the touch sensitive area (B) depends on the size
of the screen as follows: |
| |
Screen size |
d (mm) |
| |
Less than 46" |
15 to 20 |
| |
46" to 57" |
20 to 25 |
| |
Greater than 57" |
25 to 30 |
|
4 mm glass recommended for screens smaller than 32".
6 mm glass recommended for screens larger than 32". |
|
Glass types
S Standard
L laminated
T Toughened |
| |
Note: Glass of 3 mm or less cannot be toughened. |
